Remodeling cost guide for Canton homeowners
Plan with published benchmarks: Remodeling magazine’s Cost vs Value 2025 (Atlanta market) and Angi cost data. These are typical regional ranges, not Arbor & Slate quotes; your written estimate sets your actual price.
Kitchens
Typical Atlanta-area range
$28,359 – $79,591
Cost vs Value 2025, Atlanta: minor vs. major midrange kitchen averages
Key cost driver
Cabinetry tier, wall removal, appliance specs
Bathrooms
Typical Atlanta-area range
$7,400 – $19,000 (avg. about $13,000)
Angi typical range; Cost vs Value 2025 Atlanta midrange bath average: $25,304
Key cost driver
Wet-room configuration, tile selections, plumbing relocations
Basements
Typical Atlanta-area range
$15,000 – $75,000 (avg. about $32,000)
Angi typical range; Cost vs Value 2025 Atlanta basement average: $49,681
Key cost driver
Moisture mitigation, ceiling height, guest suite baths
Additions
Typical Atlanta-area range
About $162,109 (midrange primary suite)
Cost vs Value 2025, Atlanta midrange primary suite addition average
Key cost driver
Foundation tying, roof tie-in complexity, utility tie-ins
Outdoor Living
Typical Atlanta-area range
About $24,984 (composite deck)
Cost vs Value 2025, Atlanta composite deck addition average
Key cost driver
Timber framing, masonry fireplace, outdoor kitchen utilities
Kitchens scope drivers & material standards
Included turnkey scope
Standard allocations for a complete, code-permitted build in Canton, GA:
- Custom inset white oak or painted cabinetry
- Quartzite or honed quartz slab surfaces
- Structural header installation for open concept
- Dedicated electrical pathways and task lighting
Permits and plans
Permit needs are identified during scoping. Homes inside City of Canton limits are permitted by the city; unincorporated addresses go through Cherokee County.
Material finish levels
Select your finish tier to balance investment and custom architectural details:
Dovetail soft-close cabinetry, premium porcelain tile, engineered quartz surfaces, and performance plumbing fixtures from trusted architectural lines.
Fully bespoke millwork, honed marble or quartzite slabs, custom brass hardware, radiant floor heating, and architectural lighting configurations.
Full layout relocation, European white oak architectural beams, imported masonry, smart automated environmental controls, and paneled luxury appliance suites.
Frequently discussed budget factors
Direct answers to how we manage contingencies, historic Canton foundations, and fixture allowances.
Ready to review real numbers for your specific property?
We walk your Canton home, examine existing structural conditions, and prepare a written, line-item estimate before any construction commitment.
A disciplined path to flawless execution
Thorough pre-construction planning prevents unforeseen delays, preserves architectural integrity, and keeps whole-home investments aligned from initial concept to completion.
Establish lifestyle priorities
Map out daily routines, functional friction in your current floor plan, and architectural desires before architectural drafting begins.
Define non-negotiables and trade-offs
Distinguish primary structural investments like load-bearing reconfigurations from adaptable surface finishes to protect project balance.
Allocate a 10% to 15% contingency
Maintain a dedicated capital reserve for concealed framing discoveries, plumbing updates, and unforeseen site conditions in Canton homes.
Account for custom material lead times
Lock down procurement schedules early for bespoke white oak cabinetry, quarried natural stone slabs, and architectural window systems.
Prepare household and site logistics
Organize temporary kitchen accommodations, sealed negative-pressure dust barriers, and designated builder access zones prior to demo.
Ready to structure your remodeling timeline?
Schedule an in-home design consultation in Canton, Georgia to review your floor plan and scope.
Published remodeling cost data for Canton planning
The ranges on this page come from published third-party sources, so you can compare them with any estimate you receive. Atlanta-market figures come from the Remodeling magazine / JLC Cost vs Value Report 2025; bathroom and basement ranges come from Angi; whole-home cost per square foot comes from Block Renovation. None of these are Arbor & Slate quotes.
| Project | Average job cost | Resale value | Cost recouped |
|---|---|---|---|
| Minor kitchen remodel (midrange) | $28,359 | $31,712 | 111.8% |
| Major kitchen remodel (midrange) | $79,591 | $41,805 | 52.5% |
| Bath remodel (midrange) | $25,304 | $19,595 | 77.4% |
| Bath remodel (universal design) | $41,047 | $27,362 | 66.7% |
| Basement remodel | $49,681 | $45,636 | 91.9% |
| Deck addition (composite) | $24,984 | $20,264 | 81.1% |
| Primary suite addition (midrange) | $162,109 | $59,369 | 36.6% |
Source: Remodeling magazine / JLC Cost vs Value Report 2025, Atlanta market. Regional survey averages, not Arbor & Slate quotes.
| Project | Typical range | Source |
|---|---|---|
| Bathroom remodel | $7,400 – $19,000 (avg. about $13,000) | Angi |
| Basement finishing | $15,000 – $75,000 (avg. about $32,000) | Angi |
| Whole-home renovation | $167 – $218 per sq ft | Block Renovation |
| Minor kitchen remodel (midrange) | $28,359 | Cost vs Value 2025, Atlanta |
| Major kitchen remodel (midrange) | $79,591 | Cost vs Value 2025, Atlanta |
Ranges are published third-party averages for planning only. They are not Arbor & Slate prices.
What moves the number up or down
| Factor | Lower-cost end | Higher-cost end |
|---|---|---|
| Layout | Same footprint, fixtures stay put | Walls, plumbing or venting move |
| Structure | No structural changes | Beams, foundations or roof tie-ins |
| Finishes | Stock or semi-custom selections | Custom cabinetry, natural stone |
| Systems | Existing electrical and HVAC are adequate | Panel upgrades, new circuits, ductwork |
| Permits and HOA | Cosmetic work, no review | Permits, inspections and HOA approval |
For a room-by-room breakdown, see the detailed cost guide and the 2026 kitchen cost article.
Turnkey design and build for North Georgia homes. Architectural renovations delivered with care from initial design to final walkthrough.
Photos on this site are illustrative design examples, not completed Arbor & Slate projects.
Navigation
Contact
Serving Canton and Cherokee County
Canton, Georgia
Call or email to request an estimate
Service area coverage: Serving homeowners in Canton, Woodstock, Holly Springs, Ball Ground, Acworth, Kennesaw and Marietta.
© 2026 Arbor & Slate. All rights reserved.